A video demonstration of the latest FOX® Remelt Ingot Processing System recently debuted on the Vulcan Engineering YouTube channel. The video showcases the various features of the processing system by following an ingot along the line to the different sections/stages of its journey. The system can handle high alloy steel ingots from 3 to 9 inches in diameter, and 20-50 inches in length.
Ingots begin at the mold press (150 or 200 tons), where they are pressed from the mold onto a conveyor. They are then conveyed to the cut-off area where they are secured for the chop-saw end removal. Then they are transferred to the grinding section for rough and finish grinding. Lastly, the ingots are inspected, marked and removed from the system.
Watch the full video below:
For more information on the FOX® Remelt Ingot Processing System,